Velleman CAMCOLBUL27 Uživatelský manuál stáhnout pdf (Strana 4)

CAMCOLBUL27

16.12.2010 ©Velleman nv

• with B/W night vision (IR LEDs)

• super high resolution

5. Overview

Refer to the illustrations on page 2 of this manual.

1 lens 5 position bolt

2 IR LEDs 6 bracket

3 light sensor 7 camera bolt

4 sunshield

6. Hardware installation

Refer to the illustrations on page 2 of this manual.

• Choose a location for the camera, keeping following guidelines in mind:

o do not install the camera in locations where extremely high or low

temperatures or excessive vibrations may occur.

o avoid mounting the camera near high electro-magnetic fields.

o do not aim the camera at the sun or other extremely bright objects or

reflections (e.g. metal doors).

• Use the mounting bracket [6] to determine the location of the mounting

holes. Drill the holes and secure the bracket [6] using 3 screws.

•

Attach the camera to the mounting bracket [6] with the camera bolt [7].

• Connect the power connector [B] to the 12VDC power supply (not incl.).

• Connect the BNC connector [A] to a monitor (not incl.)

• Point the camera towards the field of interest and tighten the position bolt

[5].

7. Technical specifications

pick-up element

1/3" HR colour CCD image sensor -SONY Effio

DSP

pixels 753(H)x582(V) PA

horizontal resolution 600 TV lines

min. illumination 0.1 Lux (F2.0) ; 0 Lux (IR on)

IR LEDs 21

range (IR light) 15m

S/N ratio > 48dB (AGC off)

wate

-resistance IP67

electronic shutter 1/50 to 1/100000s

lens angle 92.6°

Colour Rolling Suppress yes

white balance automatic

AGC yes

standard board lens f3.6mm / F2.0

video output 1Vpp @ 75 ohms

1 2 3 4 5 6 7 8 9 ... 17 18

Komentáře k této Příručce

Žádné komentáře

Velleman CAMCOLBUL27 Uživatelský manuál Strana 4

Komentáře k této Příručce

Související produkty a manuály pro Videokamery Velleman CAMCOLBUL27