Velleman WS2800 Software User’s Guide Uživatelský manuál stáhnout pdf (Strana 14)

P a g e | 14

DETAILED INSTRUCTIONS

To tell the weather station to start communicating with the

software, press and hold the button showing a down arrow

until the weather station beeps (approximately 3-4 seconds).

When you hear the beep, this indicates that the weather

station is now searching for the USB communication device.

While the weather station searches for a USB communication

device, it will display ‘SCn-PC’ next to the time.

The weather station should now be in scan mode. Now on your

computer, click the Synchronize button.

When the weather station finds the USB device, it will beep and

the display will show ‘PC’ in the lower line (unless the date is

being displayed). The software will then update with the current

weather data from the display.

This indicates that the weather station has successfully connected (“synchronized”) with the USB communications

device (software).

Note: If the date is being displayed, you will not see “PC”.

Note: It can take up to 30 seconds for the synchronization to complete.

Note: You may have to try the synchronization process more than once.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Žádné komentáře

Velleman WS2800 Software User’s Guide Uživatelský manuál Strana 14