Velleman LAB1 Uživatelský manuál Strana 14
- Strana / 64
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
14
WORKING TEMPERATURE
Turn on the complete unit with mains switch on the back, the power indication LED (11) should lit. A well-chosen tempera-
ture is essential for efficient soldering. Solder does not flow well when the temperature is too low and this leads to weak
soldering. The flux in the solder evaporates when the temperature is too high, not giving the solder sufficient time to flow
and possibly damaging the components. The correct temperature and the correct soldering technique practically guaran-
tee a good result. The most common solder alloy consists of 60% of tin (Sn) and 40% of lead (Pb). New lead free solder
consists of 99.7% Tin (Sn) and 0.3% Copper (Cu) or 96% Tin (Sn) and 4% Silver (Ag). If the set temperature is rising, the
“heating LED” (7) will lit, as soon as the temperature is reached, the LED will blink.
For Lead containing soldering a tip temperature of about 250 to 350°C is recommended.
For Lead free soldering a tip temperature between 350 to 400°c is recommended.
It is advisable to use lead containing solder to repair lead containing solderings.
Make sure to turn the temperature control to OFF if the soldering station is not used for long time.
TIPS
ALWAYS KEEP THE SPONGE WET (water only).
Wipe the bit clean before use and keep the tip tinned when the device is not being used.
Prolonged use at high temperatures causes the bit to wear prematurely
Never clean the bit with a file or abrasive materials.
Corrosion on the bit can be removed with very fine emery cloth (600 – 800) or with isopropyl alcohol. Heat and tin
the bit immediately after cleaning
Remove and clean the bit after 20 hours of usage (or at least once a week) to avoid corrosion
Do not use corrosive flux or flux containing chlorine. Resinous flux is safe.
MAINTENANCE
Let the bit cool down before cleaning or replacing it. You can remove the bit by loosening the nut on the bit holder.
Clean the bit holder next by blowing into it forcefully. Do not forget to protect your eyes !
Put the bit back in place and tighten the nut. Wipe clean the rest of the iron and the soldering station with a damp
cloth. Do not use solvents and make sure no liquid penetrates the housing of the device.
SPARE BITS (size dependant)
Soldering station
BITC10N1 : 1.6mm round BITC10N2 : 0.8mm round
BITC10N3 : 3.0mm slant-
edged
BITC10N4 : 2.0mm
pointed & slant-edged
SPARE SOLDERING IRON
LAB1SCS
- 3 IN ONE LAB DEVICE 1
- CONTENTS 3
- REAR SIDE 5
- FRONT SIDE 5
- DIGITAL MULTIMETER 6
- FRONTPANEL 7
- SPECIFICATIONS 7
- Digital multimeter 10
- REGULATED POWER 12
- SOLDERING STATION 13
- Soldering station 14
- ACHTERZIJDE 17
- VOORZIJDE 17
- DIGITALE 18
- MULTIMETER 18
- Digitale multimeter 19
- GESTABILISEERDE 24
- VOEDING 24
- SOLDEERSTATION 25
- Soldeerstation 26
- SOMMAIRE 27
- FACE ARRIERE 29
- FACE AVANT 29
- MULTIMETRE 30
- NUMERIQUE 30
- Multimètre numérique 31
- ALIMENTATION 36
- STABILISEE 36
- STATION DE SOUDAGE 37
- Station de soudage 38
- INHALTVERZEICHNIS 39
- RÜCKPLATTE 41
- FRONTPLATTE 41
- DIGITALMULTIMETER 42
- SPEZIFIKATIONEN 43
- Digitalmultimeter 44
- STABILISIERTES 48
- LABORNETZGERÄT 48
- LÖTSTATION 49
- Lödstation 50
- CONTENIDO 51
- PARTE TRASERA 53
- PARTE FRONTAL 53
- MULTÍMETRO DIGITAL 54
- ESPECIFICACIONES 55
- Multímetro digital 56
- ALIMENTACIÓN 60
- ESTABILIZADA 60
- ESTACIÓN DE 61
- SOLDADURA 61
- Estación de soldadura 62
- 5 410329 343798 64
Související produkty a manuály pro Zařízení Velleman LAB1
Zařízení Velleman PCGU1000 Uživatelský manuál
(13 stránky)
(13 stránky)
Zařízení Velleman PCSGU250 Uživatelský manuál
(40 stránky)
(40 stránky)
Zařízení Velleman VDP900HZ2 Uživatelský manuál
(28 stránky)
(28 stránky)
Zařízení Velleman VDP1500SM Uživatelský manuál
(19 stránky)
(19 stránky)
Zařízení Velleman VDL800SMT2 Uživatelský manuál
(23 stránky)
(23 stránky)
Zařízení Velleman PMLCD Uživatelský manuál
(7 stránky)
(7 stránky)
Zařízení Velleman VDL400SM Uživatelský manuál
(19 stránky)
(19 stránky)
Zařízení Velleman VDP1000SWN Uživatelský manuál
(16 stránky)
(16 stránky)
Philips 247E4LSB/01 manuales
Manuales del propietario y guías del usuario para Televisores y monitores Philips 247E4LSB/01.
Ofrecemos 1 manuales en pdf Philips 247E4LSB/01 para descargar gratis por tipos de documentos: Manual de usuario
Komentáře k této Příručce