Velleman VDPL3603MHW11 Uživatelský manuál stáhnout pdf (Strana 7)

VDPL3603MHW11

V. 01 – 31/01/2012 7 ©Velleman nv

function display description

play <PLAY> <At01>

<At02>

auto program 1-2

<Sn01>

<Sn02>

sound controlled mode 1-2

<dnCo> DMX controlled mode

<SLAE> slave mode

manual

control

<CH12>

<d000>

<d255>

Select the setting for each channel.

display <dISP> <No> normal display

<Yes> 180° rotated display

reset <rEST> <FACt> Press <Enter> for 5 seconds to reset all settings except the

DMX starting address.

<Moto> Press <Enter> for 5 seconds to reset all settings including the

DMX starting address.

c. DMX Mode

This mode allows you to control the fixture by any universal DMX controller.

• All DMX-controlled devices need a digital start address so that the correct device responds to the signals.

This digital start address is the channel number from which the device starts to “listen” to the DMX

controller. The same starting address can be used for a whole group of devices or an individual address can

be set for every device.

• When all devices have the same address, all the units will “listen” to the control signal on one particular

channel. In other words: changing the settings of one channel will affect all devices simultaneously. If you

set individual addresses, each device will “listen” to a separate channel number. Changing the settings of

one channel will only affect the device in question.

• In case of the 12-channel VDPL3603MHW11, you will have to set the start address of the first unit to 1

(CH1~12), the second unit to 13 (1 + 12) (CH13~24), the third to 25 (13 + 12) (CH25~36), and so on.

• Press <MODE> until <Addr> is displayed.

• Use <UP> or <DOWN> to set the DMX starting address (A001~A512). Press <Enter> to confirm.

d. DMX Channel Values

channel function from to description

1 shutter/strobe

0 6 shutter closed

7 255 strobe slow -> fast

2 dimmer 0 255 master dimmer, 0-100%

3 colour

0 4 white

5 9 red

10 14 orange

15 19 yellow

20 24 green

25 29 light blue

30 34 blue

35 39 magenta

40 49 rose

50 150 colour change function 1

151 200 rose

201 255 colour change function 2

4 colour change speed 0 255 slow -> fast

5 pan 0 255 rotate head horizontally (127 = neutral)

6 tilt 0 255 move head vertically (127 = neutral)

7 pan fine 0 255 rotate head horizontally – small increments

8 tilt fine 0 255 move head vertically – small increments

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Komentáře k této Příručce

Žádné komentáře

Velleman VDPL3603MHW11 Uživatelský manuál Strana 7

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Velleman VDPL3603MHW11