Velleman LX102 Uživatelský manuál stáhnout pdf (Strana 7)

LX102

V. 01 – 06/06/2012 7 ©Velleman nv

Dimmer speed setting

1. Press <MENU> until is displayed.

2. Press <ENTER> to confirm your selection.

3. Use <UP> or <DOWN> to select the desired dimmer speed ( , ~ ).

4. Press <ENTER> to confirm your selection.

7.4 DMX Mode

This mode allows you to control the fixture by any universal DMX controller.

• All DMX-controlled devices need a digital start address so that the correct device responds to the

signals. This digital start address is the channel number from which the device starts to “listen” to

the DMX controller. The same starting address can be used for a whole group of devices or an

individual address can be set for every device.

• When all devices have the same address, all the units will “listen” to the control signal on one

particular channel. In other words: changing the settings of one channel will affect all devices

simultaneously. If you set individual addresses, each device will “listen” to a separate channel

number. Changing the settings of one channel will only affect the device in question.

o In case of the 2-channel LX102, you will have to set the start address of the first unit to 1

(CH1~2), the second unit to 3 (1 + 2) (CH3~4), the third to 5 (3 + 2) (CH5~6), and so on.

o In case of the 3-channel LX102, you will have to set the start address of the first unit to 1

(CH1~3), the second unit to 4 (1 + 3) (CH4~6), the third to 7 (4 + 3) (CH7~9), and so on.

o In case of the 7-channel LX102, you will have to set the start address of the first unit to 1

(CH1~7), the second unit to 8 (1 + 7) (CH8~14), the third to 15 (8 + 7) (CH15~21), and so

on.

1. Press <MENU> until is displayed.

2. Press <ENTER> to confirm your selection.

3. Use <UP> or <DOWN> to set the number of DMX channels ( , or )

4. Press <MENU> until is displayed.

5. Press <ENTER> to confirm your selection.

6. Use <UP> or <DOWN> to select the desired DMX starting address ( ~ ).

DMX Channel Values

2-Channel Mode

channel function from to description

1 warm white 000 255 0 ~ 100%

2 cold white 000 255 0 ~ 100%

3-Channel Mode

channel function from to description

1 maste

dimme

000 255 0 ~ 100%

2 warm white 000 255 0 ~ 100%

3 cold white 000 255 0 ~ 100%

7-Channel Mode

channel function from to description

1 master dimme

000 255 0 ~ 100%

2 warm white 000 255 0 ~ 100%

3 cold white 000 255 0 ~ 100%

4 strobe

000 009 strobe off

010 255 strobe 0 ~ 20Hz (slow ~ fast)

5 auto programs

000 051 no function

052 101 auto program 1

102 152 auto program 2

153 203 auto program 3

204 254 auto program 4

255 - auto program 5

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

Komentáře k této Příručce

Žádné komentáře

Velleman LX102 Uživatelský manuál Strana 7

Komentáře k této Příručce

Související produkty a manuály pro Osvětlení Velleman LX102