Velleman CS4MX Provozní pokyny stáhnout pdf (Strana 4)

Follow these simple steps to start using the CS4MX within minutes:

1) Insert the lower stem into the upper stem (rst press in the spring clip).

2) Twist the locking device so that the stem is locked at the required length.

3) Coil the search-head lead around the stem.

4) Plug the search-head lead into the socket on the control box.

5) Remove the battery compartment cover by loosening the four retaining screws.

6) Fit 8 x AA batteries to the battery holder being careful to observe polarity

and good contact.

7) Rotate the Discrimination Level control 1 to number 4 on the scale.

8) Set the Ground Control to ‘AUTO’.

9) Switch on and rotate the Sensitivity control to number 6 on the scale.

10) START DETECTING... metal targets give a sharp audio signal from the

loudspeaker... signals from small pieces of iron rubbish are ignored... switch to

pinpoint to identify the exact position of the target.

Rapid start

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

Velleman CS4MX Provozní pokyny Strana 4