Velleman К8057 Uživatelský manuál stáhnout pdf (Strana 8)

4. ‘SELECT’ (LD3) and ’CONFIRM’ (LD4) start flashing.

5. Release 'setup' when leds turn off.

This process takes about 10 seconds.

If the button is released before the leds turn off, the memory will not be cleared.

The unit will now respond to the default code only.

Configuration of CH1 and CH2 :

1. Push 'setup'-button repeatedly to select CH1 (left) or CH2 (right) configuration.

2. Confirm with a long push (‘CONFIRM’ flashes 3 times (LD4)).

The selected relay will remain ON.

3. Push ‘setup’-button a number of times, depending on the desired mode (see table).

At each press, ‘SELECT’ (LD3) will flash a number of times, indicating the current mode.

The unit returns to normal operation when left idle for 10s.

4. Confirm with a long push (‘CONFIRM’ flashes 3 times (LD4)).

The selected channel will turn off and the unit is ready for use.

If necessary, repeat sequence for the remaining channel.

Factory defaults : CH1 : 1htimer, CH2 : 0,5s timer

Instructions

flashes

Mode

ON/OFF

0.5s timer

5s timer

30s timer

1min timer

5min timer

15min timer

30min timer

1h timer

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Žádné komentáře

Velleman К8057 Uživatelský manuál Strana 8