Velleman EDU01 Uživatelský manuál stáhnout pdf (Strana 31)

www.vellemanprojects.com

Pag. 31

Required parts: 9V battery*, 3x1K resistor (brown black red gold), 3x100K resistor

(brown black yellow gold), 3 x red LED, 3x BC547 transistor, 3x10µF electrolytic capaci-

tor, 2x wire jumper

This circuit makes each LED light up shortly in succession. The circuit consists of 3 identical

channels. It is theoretically possible to expand; per LED a similar circuit is needed in series

with the previous. The capacitor of the next channel is charged when the transistor of the

previous channel is not conducting. As long as a certain transistor is not conducting, the rele-

vant LED will light up. Capacitor C4 is added to the circuit to create a certain starting condi-

tion when connecting power and to ensure a good operation.

Time to experiment: What happens when you change the value of R1, R2 and R3 to 10K?

1 2 ... 26 27 28 29 30 31 32

Žádné komentáře

Velleman EDU01 Uživatelský manuál Strana 31